Encasing Armor / Powered Suits

For Discussion of all things Mutant Future (especially spidergoats).

Encasing Armor / Powered Suits

Postby Gregorius21778 » Wed Feb 17, 2016 8:15 pm

Hi everyone,

I made up a "civilian" suit of encasing armor I wanted to share (see below):

The Encasing Police Armor Type “Metro Sentinel” was developed and issued in response to both the epidemic spread of riots in the centers of population as well as the growing firepower and brutality of criminals. In fact, the EPA are little more than downgraded and re-fitted versions of their military counterparts, the EMA. But industrial corporations were never shy to use an already developed design more than once.

“Metro Sentinel” Encasing Police Armor [EPA] (AC: 3)
The police-blue suit of powered armor was designed both for function and intimidation and so, it was given a 8 feet tall frame with wide shoulders. Advertised both for riot control and SWAT units, the configuration allows for a running speed of 30 mph, a jumping distance of 50 feet (or a 40 feet vertical jump) and a powerful punch (4d6 damage). The following subsystems and weapons systems (both lethal a non-lethal) are included in the design.

Air Filters: same as the military versions (MF p. 116) but with a supply of only 48 hours

IR / UV /Nigh Vision: same as the military versions (MF p. 116)

Communications: same as the military versions (MF p. 116), but with a much shorter range

Power allows for 48 hours of continued use

The PHREND system (MF p. 116) comes with two voice options: an attentive young female that sounds like a laid-back secretary (most of the time) or a masculine voice build with the vocabulary and tone of a seasoned beat cop (minus any political incorrect vocabulary).

Force screens are an optional feature, as most police departments had not had the budget to effort those. If a force screen was included, it was designed against light firearms caliber, negating up to 15 points of damage per round.

Weapon Systems: The left arm houses a stun rifle while the right houses an automatic gauss rifle (MF p.115 for both weapons). An array of flood lights (made with transparent plastex; AC:3) are mounted over both shoulders, not only for illumination but to blind criminals and rioters who try to act against the wearer (-2 on all ranged attacks when activated). A grenade launcher (MF p.111) with an integrated magazine with 12 irritant-gas grenades is mounted on the back, the weapon itself being angled mechanically, the wearer being assisted by the PHREND system when firing the weapon. To assist in arrests, both hands can be electrified (same rules as for the stun baton, p. 111).

Aside from the stun gun, the left arm also houses a foam spray gun (which tanks are located inside the suits body, near the hips). The foam gun is a system to erect makeshift road blocks by spraying a quickly expanding and hardening foam, the material becomes as resilient as light wood within 5 seconds. The use as an anti-personal weapon is prohibited, due to a chance of foam getting into nose or mouth, suffocating the victim (see below). The fuel tanks for the foam gun hold enough of the spray to create 15 cubic meters of barrier and the barrier can erected as high as 2 meters.

[Foam spray range: 3 meters. Somebody attacked by a foam gun needs to pass a DEX test to evade the attack. Those hit by it must either spend the next turn removing the expanding foam or end up enclosed. Enclosed victims need to be freed from the outside; same roll as for opening doors. There is a 5% chance of being hit into mouth and nose by the spray. A hit into mouth and nose calls for a Saving Throw against Death].
Sincerely: Gregorius21778
################################
If you like my stuff, please visit my blog.
I am furthermore looking for reviews of my products.
Gregorius21778
 
Posts: 76
Joined: Wed Sep 16, 2015 2:20 pm
Location: Bielefeld / GERMANY

Re: Encasing Armor / Powered Suits

Postby Malcadon » Sun Feb 21, 2016 3:38 pm

Nice!

You forgot one thing: ;)

Helmet: Built with an enlarged head-dome in order to not ruin the wearer's perfect “Metro Sentinel” hairdo.

Image

(yes, I had to go there :mrgreen: )

By the way, mind if I lift your civil/paramilitary EPA for the MF Wiki? The site is bare of new, fan-made Powered Armor suits.
User avatar
Malcadon
 
Posts: 221
Joined: Sat Dec 18, 2010 6:47 am
Location: I'm at your game table, fuled by caffeine and madness!!!

Re: Encasing Armor / Powered Suits

Postby Gregorius21778 » Sun Feb 28, 2016 8:22 am

Hi Malcadon,

no encasing suit of armor shall ever leave a fancy hairdo unharmed! :D

Feel free to include it in your MF Wiki. Is it possible to add a reference to my blog somewhere into the article, so that the people know where this one came from?
This would be icing on the take to me. If this is not possible (due to layout or overall concept), you are still free to re-post it there (but please attache my forum nick to it then).
Sincerely: Gregorius21778
################################
If you like my stuff, please visit my blog.
I am furthermore looking for reviews of my products.
Gregorius21778
 
Posts: 76
Joined: Wed Sep 16, 2015 2:20 pm
Location: Bielefeld / GERMANY

Re: Encasing Armor / Powered Suits

Postby Malcadon » Mon Feb 29, 2016 1:07 am

Done! The only thing missing is the weight.
User avatar
Malcadon
 
Posts: 221
Joined: Sat Dec 18, 2010 6:47 am
Location: I'm at your game table, fuled by caffeine and madness!!!

Re: Encasing Armor / Powered Suits

Postby Gregorius21778 » Mon Feb 29, 2016 7:41 am

A yes, of course, the weight. Let me see.... by RAW, the EMA have a weight between 500 lbs and 750 lbs. I guess the civilian model will be a little lighter, as they are not as heavily armoured (Plastex personal armour is 30 lbs, advanced metal is 50 lbs). I guess "a little more than 400 lbs." should be fine.
Sincerely: Gregorius21778
################################
If you like my stuff, please visit my blog.
I am furthermore looking for reviews of my products.
Gregorius21778
 
Posts: 76
Joined: Wed Sep 16, 2015 2:20 pm
Location: Bielefeld / GERMANY

Re: Encasing Armor / Powered Suits

Postby excior » Thu Sep 01, 2016 3:08 pm

Can you use the foam to creat a barrier to provide cover in combat?
excior
 
Posts: 19
Joined: Tue Jul 30, 2013 11:16 pm

Re: Encasing Armor / Powered Suits

Postby Gregorius21778 » Thu Sep 01, 2016 5:39 pm

Technically, the answer is "yes, you can". But the foam barrier has some disadvantages

First and foremost, it is only as hard as "light wood", which means it is the equivalent of hiding behind furniture. This will work very well as long as the attackers are using spears, slings, crossbows, bows and the like. It won´t be that useful as soon as modern firearms are brought to bear as the bullets will just punch through. And the regular MF world setting includes energy weapons ;).



Gregorius21778 wrote:same rules as for the stun baton, p. 111).
Aside from the stun gun, the left arm also houses a foam spray gun (which tanks are located inside the suits body, near the hips). The foam gun is a system to erect makeshift road blocks by spraying a quickly expanding and hardening foam, the material becomes as resilient as light wood within 5 seconds. The use as an anti-personal weapon is prohibited, due to a chance of foam getting into nose or mouth, suffocating the victim (see below). The fuel tanks for the foam gun hold enough of the spray to create 15 cubic meters of barrier and the barrier can erected as high as 2 meters.

[Foam spray range: 3 meters. Somebody attacked by a foam gun needs to pass a DEX test to evade the attack. Those hit by it must either spend the next turn removing the expanding foam or end up enclosed. Enclosed victims need to be freed from the outside; same roll as for opening doors. There is a 5% chance of being hit into mouth and nose by the spray. A hit into mouth and nose calls for a Saving Throw against Death].
Sincerely: Gregorius21778
################################
If you like my stuff, please visit my blog.
I am furthermore looking for reviews of my products.
Gregorius21778
 
Posts: 76
Joined: Wed Sep 16, 2015 2:20 pm
Location: Bielefeld / GERMANY


Return to Mutant Future

Who is online

Users browsing this forum: No registered users and 1 guest